Concrete Tools. Friday , August 03rd , 2018 - 10:17:48 AM
Mixing the Cerlon with the paddle causes heat to start to build up in the mixture. Heat causes the Cerlon to set. Using a heat gun you need to get the temperature up to about 80 to 90 degrees before you pour it into the area that needs to be repaired. Once it reaches 100 degrees you have only about 10 minutes to finish the patch with a trowel.
The next step is mixing the Cerlon. This is done in 5 gallon buckets using the buckets that the Cerlon comes in take and pour ½ of the Cerlon in a clean bucket and mix the product half at a time. The most important part of mixing Cerlon is the ratio of water to the Cerlon has to be measured very accurately. A paddle on an electric drill that you use from mixing taping compound or floor leveler can be used to mix the Cerlon.
Decorative Concrete Coating Techniques - Stamped Concrete: Made of fiberglass or steel, stamped concrete uses negative patterns to mark a shape or form onto wet concrete. Templates are designed in such a way to create any kind of pattern like brick, tiles, stone, wood, and flagstone. Colors are made in such a way that can easily mix with the concrete. These colors are mixed with the concrete. This technique is used to etch large and complex patterns to enhance the landscape architecture.
Any content, trademark’s, or other material that might be found on the CK Manage website that is not CK Manage’s property remains the copyright of its respective owner/s. In no way does CK Manage claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.